Estimate Shipping Cost
Details
Boaters' Resale Shop of TX 2503 5551.51 PAIR OF VERSACHOCK TILTING DINGHY DAVITS w TEN 3.5" SOFT RUBBER WHEELS EACH DAVIT STYROFOAM PROPS FOR DEMO ONLY (NOT INCLUDED)* OPTIONAL WINCHES & BLIND FASTENER SYSTEM NOT INCLUDED ALSO DECK PLATES, MINI POLY WENCHES & MOUNTING HARDWARE NOT INCLUDED * TWENTY FOUR 1/4" SCREWS REQUIRED FOR INSTALLATION (NOT INCLUDED). SEE ALL 8 PHOTOS & ALL DETAILS * SOLD IN CONDITION PICTURED * SOME ASSEMBLY MAY BE REQUIRED WHEN SHIPPED * ITEM WAS PREOWNED, USED, IS IN FAIRLY GOOD PHYSICAL CONDITION AND APPEARS TO BE OPERATING PROPERLY BUT HAS NOT BEEN TESTED FURTHER *
**Twenty four 1/4" screws required for installation (not included).**
INCLUDED WITH VERSACHOCK DAVITS:
* TEN 3.5" SOFT RUBBER WHEELS (EACH) 20 TOTALS
* TWO SAFETY HITCH PINS ON LANYARDS
* TWO LIMIT STRAPS
VERSACHOCK DAVITS SPECS.
* Capacity: 350 lbs (standard platform mounting)/ 250 lbs (narrow platform mounting).
* Approx. Davit Dimensions: 5" Width x 7" Thickness X 47" Length
* Approx. Davit Set Weight: 40 lbs
*Tilting dinghy davits with wheels by VersaChock allow for easy loading of lighter weight dinghies onto swim platforms. * *Davits are removable by simply removing 4 bolts from our exclusive, super low-profile threaded deck plates (mini poly wrenches Not Included, which are attached to hitch pin lanyards to prevent dropping them in the water!).
* Davit arms have an automatic self-latching feature, which locks the arms when rotated down (safety hitch pins must also be installed for securing arms).
* Limit straps are also included to limit the angle of the arms while loading.
* Includes 20 soft rubber wheels to help load watercraft and offers great support and cushioning for most hull shapes. * * Various winch options are offered separately.
* Also works great with VersaChock’s exclusive blind fastener system (VCBLINDWIDEDBL)
* When access to backside of mounting surface is not possible!
* Capacity: 350 lbs (standard platform mounting)/ 250 lbs (narrow platform mounting).
* Twenty four 1/4" screws required for installation (not included).
**Twenty four 1/4" screws required for installation (not included).**
INCLUDED WITH VERSACHOCK DAVITS:
* TEN 3.5" SOFT RUBBER WHEELS (EACH) 20 TOTALS
* TWO SAFETY HITCH PINS ON LANYARDS
* TWO LIMIT STRAPS
VERSACHOCK DAVITS SPECS.
* Capacity: 350 lbs (standard platform mounting)/ 250 lbs (narrow platform mounting).
* Approx. Davit Dimensions: 5" Width x 7" Thickness X 47" Length
* Approx. Davit Set Weight: 40 lbs
*Tilting dinghy davits with wheels by VersaChock allow for easy loading of lighter weight dinghies onto swim platforms. * *Davits are removable by simply removing 4 bolts from our exclusive, super low-profile threaded deck plates (mini poly wrenches Not Included, which are attached to hitch pin lanyards to prevent dropping them in the water!).
* Davit arms have an automatic self-latching feature, which locks the arms when rotated down (safety hitch pins must also be installed for securing arms).
* Limit straps are also included to limit the angle of the arms while loading.
* Includes 20 soft rubber wheels to help load watercraft and offers great support and cushioning for most hull shapes. * * Various winch options are offered separately.
* Also works great with VersaChock’s exclusive blind fastener system (VCBLINDWIDEDBL)
* When access to backside of mounting surface is not possible!
* Capacity: 350 lbs (standard platform mounting)/ 250 lbs (narrow platform mounting).
* Twenty four 1/4" screws required for installation (not included).
Specifications
| Condition | Used |
|---|---|
| Brand | VERSACHOCK |
| Manufacturer Part Number | TILTING DINGHY DAVITS(MAYBE GEN 4) |
| Condition Description | **Twenty four 1/4" screws required for installation (not included).** STYROFOAM PROPS FOR DEMO ONLY (NOT INCLUDED )* OPTIONAL WINCHES & BLIND FASTENER SYSTEM NOT INCLUDED ALSO DECK PLATES, MINI POLY WENCHES & MOUNTING HARDWARE NOT INCLUDED * SEE ALL 8 PHOTOS & ALL DETAILS * SOLD IN CONDITION PICTURED * SOME ASSEMBLY MAY BE REQUIRED WHEN SHIPPED * ITEM WAS PREOWNED, USED, IS IN FAIRLY GOOD PHYSICAL CONDITION AND APPEARS TO BE OPERATING PROPERLY BUT HAS NOT BEEN TESTED FURTHER * **Twenty four 1/4" screws required for installation (not included).** |
Recently Viewed Products