Estimate Shipping Cost
Details
Boaters' Resale Shop of TX 2607 1101.02 KIWI ANCHOR 30 LB RIDER KELLET CAB30 (ANCHOR LINE NOT INCLUDED) * SEE ALL 6 PHOTOS & DETAILS * SOLD IN CONDITION PICTURED * SOME ASSEMBLY WILL BE REQUIRED WHEN RECEIVED * ITEM WAS PREOWNED, USED, IS IN FAIRLY GOOD NAUTICAL PHYSICAL CONDITION AND APPEARS TO BE OPERATING PROPERLY BUT HAS NOT BEEN TESTED FURTHER
Description
Kiwi Anchor Buddy CAB30 Anchor Rider Kellet Sentinel 30lb Anchoring Weight
Anchor Buddy anchor weights reduce swing considerably, almost double holding power of the anchor.
Manufacturer: Kiwi Anchor Buddy
Model Number: 30lb Anchor Rider
Part Number: CAB30
Anchor Buddy anchor weights change the angle of pull on the anchor to help it dig in.
Acts as a spring to reduce all sudden movements of the boat at anchor.
These are normally transmitted through to the anchor and can cause it to dislodge and the anchor drag.
2000 year old anchoring system for extra security and less risk of anchors dragging.
30lb Model for cruising boats and pleasure boats up to 65′ ft.
Works with All-Chain, Chain and Rode, and All Rode.
For Chain Sizes up to 1/2″ and Rode up to 1-7/8″.
Also known as a Kellet or Sentinel.
Specifications:
Height: 300mm(11.8")
Depth: 160mm(6.3")
Width: 165mm(6.5")
Anchoring Method: All Chain
Size of Vessel: 18m Plus
Weight: 13.6kg (30 lbs)
Maximum Warp Size: With Chain up to 13mm (1/2 inch) (can also be used for rope warps)
Description
Kiwi Anchor Buddy CAB30 Anchor Rider Kellet Sentinel 30lb Anchoring Weight
Anchor Buddy anchor weights reduce swing considerably, almost double holding power of the anchor.
Manufacturer: Kiwi Anchor Buddy
Model Number: 30lb Anchor Rider
Part Number: CAB30
Anchor Buddy anchor weights change the angle of pull on the anchor to help it dig in.
Acts as a spring to reduce all sudden movements of the boat at anchor.
These are normally transmitted through to the anchor and can cause it to dislodge and the anchor drag.
2000 year old anchoring system for extra security and less risk of anchors dragging.
30lb Model for cruising boats and pleasure boats up to 65′ ft.
Works with All-Chain, Chain and Rode, and All Rode.
For Chain Sizes up to 1/2″ and Rode up to 1-7/8″.
Also known as a Kellet or Sentinel.
Specifications:
Height: 300mm(11.8")
Depth: 160mm(6.3")
Width: 165mm(6.5")
Anchoring Method: All Chain
Size of Vessel: 18m Plus
Weight: 13.6kg (30 lbs)
Maximum Warp Size: With Chain up to 13mm (1/2 inch) (can also be used for rope warps)
Specifications
| Condition | Used |
|---|---|
| Brand | KIWI ANCHOR |
| Manufacturer Part Number | CAB30 |
| Condition Description | (ANCHOR LINE NOT INCLUDED) * SEE ALL 6 PHOTOS & DETAILS * SOLD IN CONDITION PICTURED * SOME ASSEMBLY WILL BE REQUIRED WHEN RECEIVED * ITEM WAS PREOWNED, USED, IS IN FAIRLY GOOD NAUTICAL PHYSICAL CONDITION AND APPEARS TO BE OPERATING PROPERLY BUT HAS NOT BEEN TESTED FURTHER |
Recently Viewed Products