Estimate Shipping Cost
Details
Boaters' Resale Shop of TX 2607 2506.01 POWERSURVIVOR-40E 12V SERIES WATERMAKER BY KATADYN * HOSES NOT INCLUDED * SEE ALL 6 PHOTOS & DETAILS * SOLD IN CONDITION PICTURED * SOME ASSEMBLY (HOSES)WILL BE REQUIRED WHEN RECEIVED * ITEM WAS PREOWNED, USED, HAS SOME MINOR STAINS & CORROSION BUT IS IN FAIRLY GOOD PHYSICAL CONDITION AND MOTOR & PUMP ASSEMBLY IS ACTIVATED WHEN BOAT VOLTAGE IS APPLIED AND THE SYSTEM APPEARS TO BE OPERATING PROPERLY, BUT HAS NOT BEEN TESTED FURTHER DUE TO LACK OF HOSES
Description
Katadyn Desalinators are built to rigorous specifications and designed to produce potable freshwater from clean seawater using minimal power.
Features:
World's smallest electrical desalinator
Only power watermaker that converts to manual operation in emergencies
Manual feature:
Manual operation is useful when normal ship's power is unavailable
Note: The PowerSurvivor 40E watermaker was never intended to be part of a vessel's "Abandon Ship" equipment
Contains 40% fewer parts than its popular predecessor, the PowerSurvivor 35
Simplified construction and rugged design make the 40E remarkably easy to install, operate and maintain
Extraordinarily compact - can be installed in the nooks and crannies otherwise unusable in many yachts
Using only 4A, the 40E can run for extended periods on alternative power alone
Rugged stainless high-pressure pump. Armed for the rigors of the marine environment, this watermaker is built to last
Specifications:
Water Source: Salt water
Group Size: 1, 2-5
System Type: Analog
Technology: Reverse Osmosis
Output (+/- 15%): 1.50 Gal per hour (5.70 L/h )
Salt Rejection (Average): 98.4% (min. 96%)
Power Requirements: 12V DC/4A
Dimensions (L x W x H): 16.34" x 6.71" x 15.37" (41.5 x 17.04 x 39.0 cm)
Weight: 25 lbs (11.3 kg)
Included:
PS 40 Unit - Membrane/Motor/Pump Assembly Filter Housing
Model 28 Series (Filter Installed) Replacement Filter
One Whole house filter housing
Three different valves
Manual pump handle assembly
Description
Katadyn Desalinators are built to rigorous specifications and designed to produce potable freshwater from clean seawater using minimal power.
Features:
World's smallest electrical desalinator
Only power watermaker that converts to manual operation in emergencies
Manual feature:
Manual operation is useful when normal ship's power is unavailable
Note: The PowerSurvivor 40E watermaker was never intended to be part of a vessel's "Abandon Ship" equipment
Contains 40% fewer parts than its popular predecessor, the PowerSurvivor 35
Simplified construction and rugged design make the 40E remarkably easy to install, operate and maintain
Extraordinarily compact - can be installed in the nooks and crannies otherwise unusable in many yachts
Using only 4A, the 40E can run for extended periods on alternative power alone
Rugged stainless high-pressure pump. Armed for the rigors of the marine environment, this watermaker is built to last
Specifications:
Water Source: Salt water
Group Size: 1, 2-5
System Type: Analog
Technology: Reverse Osmosis
Output (+/- 15%): 1.50 Gal per hour (5.70 L/h )
Salt Rejection (Average): 98.4% (min. 96%)
Power Requirements: 12V DC/4A
Dimensions (L x W x H): 16.34" x 6.71" x 15.37" (41.5 x 17.04 x 39.0 cm)
Weight: 25 lbs (11.3 kg)
Included:
PS 40 Unit - Membrane/Motor/Pump Assembly Filter Housing
Model 28 Series (Filter Installed) Replacement Filter
One Whole house filter housing
Three different valves
Manual pump handle assembly
Specifications
| Condition | Used |
|---|---|
| Brand | PUR by RECOVERY ENGINEERING |
| Manufacturer Part Number | POWERSURVIVOR-40E |
| Condition Description | HOSES NOT INCLUDED * SEE ALL 6 PHOTOS & DETAILS * SOLD IN CONDITION PICTURED * SOME ASSEMBLY (HOSES)WILL BE REQUIRED WHEN RECEIVED * ITEM WAS PREOWNED, USED, IS IN FAIRLY GOOD PHYSICAL CONDITION AND MOTOR & PUMP ASSEMBLY IS ACTIVATED WHEN BOAT VOLTAGE IS APPLIED AND THE SYSTEM APPEARS TO BE OPERATING PROPERLY, BUT HAS NOT BEEN TESTED FURTHER DUE TO LACK OF HOSES |
Recently Viewed Products